350-501 Free Questions Good Demo For Cisco 350-501 Exam Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well 1. What occurs when a high bandwidth multicast stream is sent over an MVPN using Cisco hardware? A. Option A B. Option B C. Option C D. Option D Answer: D 2.Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces? A) B) C) D) Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well A. Option A B. Option B C. Option C D. Option D Answer: C 3.A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an engineer apply? Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well A. Option A B. Option B C. Option C D. Option D Answer: A 4.ESTION NO: 75 Refer to the exhibit: Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well You are configuring an administrative domain implement so that devices can dynamically learn the RP? A. SSM B. BID1R-PIM C. BSR D. Auto-RP Answer: C 5.Which statement about segment routing prefix segments is true? A. It is linked to a prefix SID that is globally unique within segment routing domain. B. It is the longest path to a node. C. It is linked to an adjacency SID that is globally unique within the router. D. It requires using EIGRP to operate. Answer: A 6.After implement MPLS protocol for multiple VRFs on a single Cisco device, the engineer notices all VRFs on the router still do to not LDP session protection feature enabled. Which configuration must the engineer apply to enable the LDP session protection feature FOR LDP neighbors within each VRF? A. Configure LDP session protection globally on the device only. B. Configure LDP session protection globally on the device and on each neighbor that requires session protection. C. Configure LDP session authentication on the device to enable LDP session protection on each VRF automatically. D. Configure LDP session protection within the individual VRFs. Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well Answer: D 7.Refer to the exhibit. Which type of DDoS attack will be mitigated by this configuration? A. SYN flood B. smurf attack C. SIP INVITE flood attacks D. teardrop attack Answer: B 8.What is a characteristic of prefix segment identifier? A. It contains a router to a neighbor B. It contains the interface address of the device per each link C. It is globally unique. D. It is locally unique. Answer: C 9.You are writing an RPL script to accept routes only from certain autonomous systems Consider this code. If you apply this code to BGP filters, which effect does the code have on your router? A. denies routes from AS 7070 B. allows routes from AS 7077 C. denies routes from AS 7007 D. allows routes from AS 770 Answer: B Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well 10.Refer to the exhibit. An engineer is implementing BGP selective prefix suppression. The router must advertise only 10.16.4.0/24,10.16.5.0/24. and summarized route 10.16.0.0/21. and suppress 10.16.6.0/24. Which configuration must the engineer apply to the router? A) B) C) D) A. Option A B. Option B C. Option C D. Option D Answer: B 11.Refer to the exhibit. Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well An ISP provides shared VoIP Extranet services to a customer in VRF-100 with these settings: ✑ The VoIP services are hosted in the 198.19.1000/24 space. ✑ The customer has been assigned the 198.18.10/29 IP address bloc*. ✑ VRF-100 is assigned Import and export route target 85010:100. Which configuration must the engineer Apply to PE-1 to provision VRF-100 and provide access to the shared services? Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well A. Option A B. Option B C. Option C D. Option D Answer: C 12.Refer to the exhibit. An engineer applied a gRPC dial-in configuration on customer's router to provide connection multiplexing and two-way streaming. What does this configuration accomplish in a gRPC? Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well A. It is the encoding requested by the gRPC server. B. IT is the encoding that is used for dial-in and dial-out. C. It is used for encoding with the default protocol buffers D. It is the encoding requested by the gRPC client. Answer: A Explanation: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKNMS-3537.pdf https://xrdocs.io/telemetry/tutorials/2018-03-01-everything-you-need-to-know-about- pipeline/ https://community.cisco.com/t5/service-providers-documents/implementing-grpc- telemetry-on-xr-devices/ta-p/3393966 13.Refer to the exhibit. What does this REST API script configure? A. application profile B. VRF C. public community string for SNMP D. interface with IP address 192.168.0.1 Answer: D 14.Refer to the exhibit. Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 network via BGP and advertise then into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default router 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve this problem? Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well A. Option A B. Option B C. Option C D. Option D Answer: D 15.Refer to the exhibit. A network administrator is implementing IGMP to enable multicast feed transmission to the receiver. Which configuration must the administrator deploy on GW1 to permit IGMP Joins only to the assigned (S, G) feed? A) Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well B) C) D) Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well A. Option A B. Option B C. Option C D. Option D Answer: B 16.Refer to the exhibit: What does this value mean when it is received in XML? A. It shows the ending of the script B. It indicates a break in a sequence C. It indicates a value assigned by a network administrator to tag a route D. It means a data field is blank Answer: D 17.How is a telemetry session established for data analytics? A. A router initiates a session using the dial-out to a destination. B. A destination initiate a session to a router. C. The destination initiate a session using the dial-out more to the router. D. A router requests the data using Teinet. Answer: A 18.Refer to the exhibit: Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well This configuration is being applied on an IOS XR router. Which statement about this configuration is true? A. It is used to set up configuration to poll network data B. It is used to enable gRPC C. It is used to create a streaming subscription with a 60-second interval D. It is used to create a streaming subscription with a 600-second interval Answer: C 19.Refer to the exhibit. Which task completes the configuration? A. Specify the maximum number of prefixes that R1 receives from neighbor 192.168.1.2. B. Specify the source interface in the neighbor statement. C. Specify the activate neighbor 192.168.1.2 under the IPv4 address family. D. Specify the local-as value in the neighbor statement. Answer: C 20.An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; ✑ The switchport must tag all trame when it enters the port ✑ The switchport Is expected to provide the same level of service to traffic from any customer VLAN Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well Which configuration must the engineer use? A. Option A B. Option B C. Option C D. Option D Answer: D Explanation: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/1 6-12-1/b-ce-xe-16-12-asr900/m_ce_802_1ad_900.html 21.What is a primary benefit of IPoATM or MPLS over ATM backbone service provider networks? A. dedicated circuits B. variable-length packets C. isochronous system D. fixed-length cells Answer: A Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well 22.Refer to the exhibit. While troubleshooting the OSPF adjacency between routers R1 and R2 an engineer noticed that both routers are stuck in the EXCHANGE/EXSTART state. What should the engineer fix to solve the ongoing issue? A. match IPv4 addresses B. match OSPF areas C. match OSPF network types D. match MTU values Answer: D 23.An engineer must extend Layer 2 Between two campus sites connected through an MPLS backbone that encapsulates Layer 2 and Layer 3 data. Which action must the engineer perform on the routers to accomplish this task? A. Configure a EtherChannel for E-LAN. B. Configure a pseudowire for E-LINE. C. Configure Cisco MPLS TE for use with E-TREE. D. Configure QoS for MPLS and E-ACCESS Answer: B Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well 24.Refer to the exhibits: R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2 R1 message periodically Based on this output, which statement is true? A. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs B. 1S-1S neighbor authentication is failing for Level 1 and Level 2 PDUs . C. IS-IS neighbor authentication is failing for Level 1 PDUs only D. IS-IS neighbor authentication is failing for Level 2 PDUs only. Answer: C 25.Which three OSPF parameters must match before two devices can establish an OSPF adjacency? (Choose three.) A. IP address B. interface cost C. subnet mask D. process ID E. hello timer setting F. area number Answer: C,E,F 26.Refer to the exhibit. Valid Cisco 350-501 Exam Questions [2022] Prepare 350-501 Exam Well An engineer is configuring two routers to support MPLS LDP sessions between them. The R1 configuration is complete, and work has started on R2 as shown. Which additional configuration must the engineer apply to R2 to complete the task? A. Option A B. Option B C. Option C D. Option D Answer: C 27.Which feature will an operator use while implementing MPLS TE on customer's network, to prevent an LSP from using any overseas inks?